Info: 'It is very ungrateful of you to eject the disk this way. Your amorphous instinct makes you halt this test. (Warning! The disk is now unreadable.)'
DITL_265.txt
Items: (2 entries)
0:
Bounds: x1=269, y1=100, x2=328, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=74, y1=7, x2=328, y2=87
Type: -120
Info: 'I have detected errors writing a group of disk blocks, but I could not find out which sector has problems. These intermittent errors attest that this disk is very unreliable.'
DITL_264.txt
Items: (2 entries)
0:
Bounds: x1=183, y1=52, x2=242, y2=72
Type: 4
Info: 'Quit'
1:
Bounds: x1=74, y1=7, x2=242, y2=39
Type: -120
Info: 'Sorry, memory is really full.'
DITL_263.txt
Items: (3 entries)
0:
Bounds: x1=303, y1=100, x2=362, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=231, y1=100, x2=290, y2=120
Type: 4
Info: 'Cancel'
2:
Bounds: x1=74, y1=7, x2=362, y2=87
Type: -120
Info: 'Disk ^0 contains valid information (^1 Kbytes free): shall I inspect it anyway? (DATA ON THIS DISK WILL BE DESTROYED!)'
DITL_262.txt
Items: (3 entries)
0:
Bounds: x1=256, y1=52, x2=328, y2=72
Type: 4
Info: 'Stop'
1:
Bounds: x1=171, y1=52, x2=243, y2=72
Type: 4
Info: 'Continue'
2:
Bounds: x1=74, y1=7, x2=328, y2=39
Type: -120
Info: 'Do you really want to abort testing now?'
DITL_261.txt
Items: (2 entries)
0:
Bounds: x1=269, y1=100, x2=328, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=74, y1=7, x2=328, y2=87
Type: -120
Info: 'The Alternate Master Directory Block is bad. You should reformat the disk, because some utilities (such as Disk First Aid) rely on this sector to recover bad disks.'
DITL_260.txt
Items: (9 entries)
0:
Bounds: x1=66, y1=138, x2=145, y2=162
Type: 4
Info: 'OK'
1:
Bounds: x1=197, y1=138, x2=285, y2=162
Type: 4
Info: 'Cancel'
2:
Bounds: x1=152, y1=47, x2=348, y2=63
Type: 16
Info: ''
3:
Bounds: x1=18, y1=80, x2=130, y2=96
Type: 5
Info: 'Skip warnings'
4:
Bounds: x1=218, y1=80, x2=318, y2=96
Type: 5
Info: 'Bigger disks'
5:
Bounds: x1=18, y1=105, x2=186, y2=121
Type: 5
Info: 'Beep every bad sector'
6:
Bounds: x1=23, y1=8, x2=187, y2=24
Type: -120
Info: 'Disk Charmer settings…'
7:
Bounds: x1=18, y1=47, x2=137, y2=63
Type: -120
Info: 'Name new disks:'
8:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 1
Info: ' '
DITL_259.txt
Items: (2 entries)
0:
Bounds: x1=211, y1=52, x2=270, y2=72
Type: 4
Info: 'Quit'
1:
Bounds: x1=74, y1=7, x2=270, y2=39
Type: -120
Info: 'Sorry, Disk Charmer requires System 4.3 or later.'
DITL_258.txt
Items: (3 entries)
0:
Bounds: x1=166, y1=184, x2=270, y2=211
Type: 4
Info: 'OK'
1:
Bounds: x1=16, y1=6, x2=420, y2=70
Type: -120
Info: 'Disk Charmer formats floppy disks and locks out bad sectors if necessary. It does extensive error checking (both high and low-level errors). “Bigger disks” shrinks the catalog, giving you more free space if you plan to keep a limited '
2:
Bounds: x1=16, y1=70, x2=420, y2=166
Type: -120
Info: 'number of files on the disk. If you like it, please honor the shareware concept by sending me $20. My address is:Fabrizio OddoneC.so Monte Cucco 59/F10141 Torino - ItalyVoice: +39 11 378948'
DITL_257.txt
Items: (2 entries)
0:
Bounds: x1=269, y1=100, x2=328, y2=120
Type: 4
Info: 'OK'
1:
Bounds: x1=74, y1=7, x2=328, y2=87
Type: -120
Info: 'There is not enough memory to allocate the disk buffer needed. Remember that Disk Charmer can use MultiFinder temporary memory or application memory.'
DITL_256.txt
Items: (17 entries)
0:
Bounds: x1=398, y1=256, x2=459, y2=276
Type: 4
Info: 'Quit'
1:
Bounds: x1=303, y1=222, x2=388, y2=242
Type: 4
Info: 'Stop .'
2:
Bounds: x1=150, y1=223, x2=227, y2=239
Type: 0
Info: ''
3:
Bounds: x1=380, y1=9, x2=459, y2=29
Type: 4
Info: 'About…'
4:
Bounds: x1=20, y1=11, x2=331, y2=27
Type: -120
Info: 'Disk Charmer ^0 by Fabrizio Oddone'
5:
Bounds: x1=20, y1=36, x2=460, y2=52
Type: -120
Info: 'Now ^1'
6:
Bounds: x1=20, y1=60, x2=444, y2=76
Type: -120
Info: 'Volume: ^2'
7:
Bounds: x1=20, y1=84, x2=444, y2=180
Type: -120
Info: 'System 7 automatically locks out bad sectors, thus enabling “lock out” is not necessary. Note for the technically inclined: “lock out” walks and modifies the VCB queue.'
8:
Bounds: x1=20, y1=224, x2=146, y2=240
Type: 5
Info: 'Initialize and…'
9:
Bounds: x1=303, y1=256, x2=388, y2=276
Type: 4
Info: 'Settings…'
10:
Bounds: x1=44, y1=190, x2=420, y2=205
Type: -128
Info: ''
11:
Bounds: x1=20, y1=247, x2=211, y2=282
Type: 5
Info: 'Automatically switch to“lock out” if “verify” fails'
